Tag Archives: setup

Access Raspberry Pi over your network

RaspberryPi_Logo1- Plug Raspberry Pi to HDMI, keyboard, network cable (cat5) SD card with the OS

2- connect PU 5 volt 2.1 amp

3- Select Rasbian OS to install

4- Wait for the installation to finish

5- If everything is ok, you should see a screen as follows

16- Now, you can plug off your HDMI cable.

7- Open Terminal in your Mac OS X.

8- Find the ip of your Raspberry Pi from your router’s GUI (Type : 192.168.x.x – whatever yours…Login and find a menu named LAN. Right there, you should see the local ip address of your Raspberry Pi – e.g. Mine is

9- In terminal window type as follows to connect your Raspberry Pi with SSH over network:
ssh pi@

Screen Shot 2015-01-25 at 21.55.56

pi is the default username and raspberry is the default password of your Raspberry Pi. Hit the Return and enter the password.

You should see something like this:

Screen Shot 2015-01-25 at 21.56.09

10- Now, type sudo raspi-config sudo is for administrator

Move the cursor to the Advanced Options hit Return. Then move cursor to SSH hit Return. Enable it.
Screen goes black and the it says “SSH enabled”. Hit OK.

11- If you mind to use your Raspberry Pi as a NAS only, you don’t need much GPU power. So, it’s better to make it lower. Goto Advanced Options->Memory Split. Type the lowest value which is 16 and OK.

12- Few commands to use with your Raspberry Pi over network;
sudo halt – to shutdown
sudo reboot – to restart

How to install packages/extensions/plugins for Sublime Text 2?


Formerly, I was using Coda. It was a nice editor for me. But, I left working with Coda after the last updates. I couldn’t be comfortable with the new UI design. So, I started searching a new editor and came across with Sublime Text 2. I think, it is one of the best code editors that I’ve ever used in terms of app launching speed, smart UI design (actually it’s so minimal, the magic is the key bindings) and opens with your last projects and etc…

I have been working with Sublime Text 2 for two years nearly. After some time, I need to enhance it to save much more time while I’m coding. There will be another post about extension / plugins which I use with Sublime Text 2 in the future by the way…

Anyways, I mean if you’re looking for a new code editor, suggest you to check Sublime Text. It supports every language, scripts that I know.

Installing extensions is an easy process actually. But sometimes it can be hard to find pure and correct information about the context you are searching for. And I don’t understand why So here is the steps for Mac OS X;

1- Download the package/plugin/extension (whatever you say)

2- Unzip it as usual

3- Open Sublime Text 2 and navigate to Sublime Text 2 >Preferences > Browse Packages…

Screen Shot 2013-08-13 at 12.55.00 AM









4- Copy the extracted folder into Packages folder and restart Sublime Text 2. That’s it.

Screen Shot 2013-08-13 at 12.56.58 AM









5- To change settings or define new key bindings goto Sublime Text 2 >Preferences > Page Settings > Downloaded_Package_Folder_Name

Screen Shot 2013-08-13 at 1.04.33 AMIf you want to change setting or key bindings DO NOT edit the default files! There are extra user files for your customizations. By doing this you can avoid yo loose your settings after updates…